Forum

API Robot – Loads

Etiquetas: teste

Iniciar Sessão Registe-se Perdeu a password?

A visualizar 3 artigos - de 1 a 3 (de um total de 3)

Autor

Artigos
louispips50
Convidado

10 de Junho, 2022 às 19:45

Número de artigos: 172

#883

Hello everyone,

I would like talk about the way of adding several nodes force (example x4).

I did like following example :

case_number = cases.FreeNumber
dl= cases.CreateSimple(case_number, “n1”, IRobotCaseNature.I_CN_EXPLOATATION, IRobotCaseAnalizeType.I_CAT_STATIC_LINEAR)
dl_record = dl.Records.Create(IRobotLoadRecordType.I_LRT_NODE_FORCE)
dl_record = IRobotLoadRecord(dl_record)
dl_record.Objects.AddOne(node1) # select nodes
dl_record.SetValue(IRobotNodeForceRecordValues.I_NFRV_FZ,XXX)
dl_record.SetValue(IRobotNodeForceRecordValues.I_NFRV_FX,XXX)

The only solution I find is to do that for each nodes (ie x4) and combine in a “load combinaison” after

Do you have any ideas to be more efficient about that ?

Thank you in advance,
Louis

kaneza
Convidado

10 de Junho, 2022 às 21:35

Número de artigos: 172

#937

dl_record.Objects return a Robotselection so you can add or exclude text by AddText or ExcludeText functions.

1 | dl_record.Objects.AddText(“1 2 3 4”)

function FromText exist also.

Best regards.

louispips50
Convidado

11 de Junho, 2022 às 13:58

Número de artigos: 172

#938

Hi @kaneza,

With this method I only put same load on each node right ?

I would like to add one load case with force different according to node (so 1 load case with 4 points and 4 differents foces).

I would like to :

dl2_record = IRobotLoadRecord(dl2_record)
dl2_record.Objects.AddText(“node1 node2 node3 node4 “) (with node1=[0,0,0] node2=[X,0,0] etc – I don’t sure AddTex methode is required for that)
dl2_record.SetValue ==> one by node

I am already working on with this document but the translation betweenn C++/Cnet with Python is not really easy to do..

Thank you in advance,

Louis
Autor

Artigos

Iniciar Sessão Registe-se Perdeu a password?

A visualizar 3 artigos - de 1 a 3 (de um total de 3)

Tem de iniciar sessão para responder a este tópico.