Resposta a: PleoRB firmware problems

[Adam]

#1009

Hi Ashley

Success of sorts!

Got PleoRB connected

https://1drv.ms/u/s!As6F3Yo9RN…..8?e=o7vXe8
https://1drv.ms/u/s!As6F3Yo9RN…..t?e=vjcWrv

Pleo Hardware Configuration:
Hardware ID: 0A081C07-1E2F1F28-00002C30-FFFF87FF (071E2F87)
Serial Number: 662926892475
Board Revision: 17-8
Board Revision ADC: 521
Build Configuration:
Firmware built for: Pleo
Build type: RELEASE
Pleo main ARM version: 191M – Nov 29 2010 12:05:26
Pleo head ARM version: 0902
Pleo PM (DF) version: 1157 – Jan 06 2011 06:41:50
Bootloader version: 187M – Nov 11 2010 19:08:58
Compiled in: Thumb mode
Resource folders: on
Acroname Toshiba Configuration:
TSB0: Version 30
TSB1: Version 30
TSB2: Version 30
TSB3: Version 30
VM Configuration:
Incremental mode: off
Code swapping: false

ls
—rw-x 1206 SYS_STATS.SSF
—rw-x 7606 pm_props
—rw-x 0 touch.txt
—rw-x 0 rtc.txt
—rw-x 0 foot.txt
—rw-x 0 rfid.txt
—rw-x 0 ntc.txt
—rw-x 0 camera.txt
—rw-x 0 snd_op.txt
—rw-x 0 ir_obj.txt
—rw-x 0 ir_com.txt
—rw-x 0 tilt.txt
—rw-x 0 shake.txt
—rw-x 0 bat_ntc.txt
—rw-x 0 vr_eep.txt
—rw-x 0 join_cal.txt
—rw-x 0 photo_cap.txt
—rw-x 32816 plogfile.dat
—rw-x 10556 table.bin
—rw-x 1 gender.bin
—rw-x 7606 pm_props_backup
—rw-x 0 snd_dir.txt
—rw-x 0 vr_cmd.txt
—rw-x 0 us_rx.txt
—rw-x 0 move.txt
—rw-x 0 motor.txt
—rw-x 0 card.txt
—rw-x 7606 pm_cloning_props
28 file(s) with total size 67397

AFTER A LONG TIME DELETING FILES ONE AT A TIME:::::::::::::::

>
ls
—rw-x 1206 SYS_STATS.SSF
1 file(s) with total size 1206

BUT IT STILL BOOTS!! Both from internal dataflash and SD card, go figure
My new step will be to load the Ugobe Pleo reset software to it and see what happens!

Wish me luck!